HACKER SAFE certified sites prevent over 99% of hacker crime.


You are here:Home > Insulation / Asbestos Tools > MISC TOOLS
Sort By:
Page of 1
Bungee Cord 1/2" Per Foot
Bungee Cord 1/2" Per Foot
Our Price: $2.00

Black / white in color.
Komelon TS1 89012 Torch safe Utility Torch Holder
Komelon TS1 89012 Torch safe Utility Torch Holder
Our Price: $7.00

Komelon Utility Torch Safe Torch Holder is safe, convenient, and a must have for utility torches. The Torch Safe's holds and stores your utility torch and should be installed in your work van, on your tool box, or right next to your work bench.

527 General 5X Eye Loupe
527 General 5X Eye Loupe
Our Price: $8.00

Our professional quality Eye Loupe is the jeweler’s choice for examining fine gemstones or repairing intricate bracelets and watches. It is also a common selection of instrument assemblers and toolmakers for its compact size and acute magnification. The Eye Loupe employs a 5x optical glass magnifying lens, allowing you to thoroughly examine your work with the utmost clarity.

• 5x magnifying lens.
• Creates sharp, clear magnification without straining the eye.
• Used by jewelers, toolmakers and instrument assemblers.
• Also great for hobbyists and craftsmen.
• Optical glass lens is ground and polished.
• Lens diameter is 1”.
• Focal length is 2”.
Brush tip for One pint  glue/adhesive gun armaflex, Insulation Tools
Brush tip for one pint glue / adhesive gun
Our Price: $10.00

Brush tip for One pint  glue/adhesive gun . Perfect for Armstrong 520 glue. Brush not included. See item " 1PTADGUN" for gun body
544 Wilde Hook Tool  / Lacing Needle
544 Wilde Hook Tool / Lacing Needle
Our Price: $11.00

Overall length 7" . Made in USA
DWHT46031 Dewalt 7" Aluminum Square
DWHT46031 Dewalt 7" Aluminum Square
Our Price: $16.00

Malco 9A Adjustable Folding Tool
Malco 9A Adjustable Folding Tool
Our Price: $21.00
Sale Price: $18.00

Malco’s No. 9A Adjustable Folding Tool easily folds edges of aluminum siding, trim coil and lighter gauges of sheet metal up to 26 gauge (0.56 mm). The 9A quickly adjusts from 1/4” to 1-1/2” (6.4 mm to 38.1 mm) folding depths in 1/4” (6.4 mm) increments. The adjustment mechanism is completely hand operated; there are no loose parts or extra tools to contend with. A compact 3-1/4” x 9” (83 x 229 mm) size provides easy leverage for any folding depth.

The tool also features a handy hang hole for workbench applications, or stores easily in a tool box. Fully hardened steel plate construction and corrosion resistant black zinc coating assures long service life.
DWHT70800 Dewalt 8" Long Nose Plier
DWHT70800 Dewalt 8" Long Nose Plier
Our Price: $18.00

DWHT46032 Dewalt 12" Aluminum Square
DWHT46032 Dewalt 12" Aluminum Square
Our Price: $21.00

Stamped-in contrasting color graduations for better readability.
Extra-thick extruded aluminum body holds up to heavy-duty use, ideal for use as saw guide.
Large base helps provide better grip on materials. Scribe line notches for marking rip cuts.
24103 SG133-7-PCP  Dexter Russell 7 inch narrow fillet knife
24103 SG133-7-PCP Dexter Russell 7 inch narrow fillet knife
Our Price: $24.00

Tee Master by J & J Tool
Tee Master by J & J Tool
Our Price: $24.00

Lay out regular tee templates from 1” to 12” in seconds. This tool is made of very durable ABS thermal plastic. Only 7” x 11” and 1/16” thick, it is lightweight and easy to carry. It has a 1” to 6” scale, graduating in 8ths. Will not rust or corrode. Example instructions accompany each tool.
One pint  glue/adhesive gun . Perfect for Armstrong 520 glue
One pint glue / adhesive gun
Our Price: $28.00

One pint  glue/adhesive gun . Perfect for Armstrong 520 glue. Brush not included. See item " brush1pt"
Gore Rule by J & J Tool
Gore Rule by J & J Tool
Our Price: $33.00

Simple step-by-step instructions are included with each rule. This 6” x 6” square also has a protractor for laying out T-patterns. Made of heavy 14 gauge steel, it’s laser etched with rust resistant black oxide finish. The layout rule is a must for all insulators and sheet metal workers.
L3-CS Markwell Outward Clinch Stapler
L3-CS Markwell Outward Clinch Stapler
Our Price: $46.00

This special application tacker is well known in the Insulation Industry, for stitching fiberglass insulation. Also finds specialized uses for attaching labels to cartons without penetrating the contents, firmly fixing shooting-range targets with easy staple removal, and out-clinch-stapling where a clinching anvil cannot be used.

   * Uses Markwell heavy wire L3 Series staples.
   * Easily removable outward-clinch door for quick reloading or replacement.
   * Low maintenance.
   * Rugged construction for toughest environments.

Uses full range of Markwell L3 Series heavy wire staples, 0.050: x 0.020”, (1.27 x .5 mm) available in galvanized, monel, aluminum, and bronze wires.
G5-OC Markwell Outward Clinch Tacker
G5-OC Markwell Outward Clinch Tacker
Our Price: $48.00

Same as the G-26 outward clinch tacker, the G5-has been designed to use heavy duty staples similar to STCR 5019 type staples to 9/16" leg length, for the really tough wire stitching jobs in insulation, attaching labels to corrugated cartons without damaging contents, etc. Wearing parts, such as the outward clinch door, and most other parts, are compatible and interchangeable with the discontinued T5-8-OC tacker.

This special application tacker is normally only available through specialty distributors to the Insulation and HVAC Industries, or trade catalogs.


Takes the full range of staples similar to STCR 5019 type staples from Ό” to 9/16”.
Markwell G-26 Outward Clinch Tacker, Insulation Tools
Markwell G-26 Outward Clinch Tacker
Our Price: $61.00

Designed for exclusive use with STCR 2619 type fine wire staples, to ½" leg length. The outward clinch door is easily removable for front loading of staples, or replacement. Wearing parts, such as the outward clinch door, and most other parts, are compatible and interchangeable with the discontinued T5-8-OC tacker.

This special application tacker is normally only available through specialty distributors to the Insulation and HVAC Industries, or trade catalogs.


Designed for use with STCR 2619 type staples.
Markwell Brand staples similar to the above types, are available, as follows:


Similar to:
STCR 2619-1/4”
STCR 2619-3/8”
STCR 2619-1/2"
Galvanized and Stainless Steel.
Blades,Stanley 100 count 11-921
11-921 Stanley Blades,100 count
Our Price: $140.00

Pointed razor type reversible blades for utility knives. Regular blades are interchangeable for use with model No. 99, 199, 299, and 1299 knives and most other utility knives. Heavy duty blades are interchangeable with model No. 99, 199, 299, and 1299 and
Malco C5A Power assisted crimper
Malco C5A Power assisted crimper
Our Price: $194.00

Make fast, easy, precise crimps in large or small round duct and pipe.  Applications include 24 to 30-gauge (0.71 to 0.41 mm) galvanized steel duct, spiral duct, black stove pipe, or aluminum pipe.  The drive shaft of the Crimper Turbo-X-Tool attachment inserts into the chuck of a minimum 14.4 Volt cordless or maximum 7 Amp A/C drill.  A telescoping clamp adjusts to fit length and width of any drill housing.  The installed Crimper attachment is easily operated with one hand.  With the drill set at low forward drilling speed the rotation of meshing teeth on adjacent gears provides desired crimp and drives the metal out the right side of the tool.  A 9:1 gear reduction ensures safety and control.  Set crimper lever in the down position to open gears for easy insertion and removal of metal in the tool face slot.  The narrow slot prevents fingers from entering the gear area.  With the lever in up position, the crimping depth is factory set for 26 to 28-gauge (0.56 to 0.48 mm) Galvanized Steel.  Back off the lever a stop at a time for lighter metals or readjust the maximum crimp with lever set screws.  A clutch in the gear mechanism prevents damage to the crimper attachment if metal exceeds capacity.